11.11.1. Removal and installation of the combined switch

The directing pin for joining of the socket of the combined switch (it is shown by an arrow)


  1. Disconnect a wire from the minus plug of the battery.
  2. Remove the lower guard of the dashboard and a rasstykuyta the multicontact socket.
  3. Remove a rubber cover of the lever of the switch.
  4. Unscrew fastening screws with crosswise vents.
  5. Disconnect wires of the switch of a sound signal, having weakened screws of clips.
  6. Remove the switch, extending a plait of wires through a panel aperture.
  7. Installation of the switch is made as it should be, the return to removal.