11.11.15. Removal and installation of the drive of a cleaner of a headlight

 PERFORMANCE ORDER

  1. Remove brushes and levers of a cleaner (one nut).
  2. Remove a block headlight.
  3. Disconnect a wire from the minus plug of the rechargeable battery.
  4. Otstykuyte I will corrode conductings from the drive.
  5. Turn off nuts of fastening and remove the drive.
  6. Installation is made as it should be, the return to removal. Before installation of the lever and a brush switch on and off the drive that the roller of the drive was installed in a starting position.