12:10. Removal and installation of the power window

Bolt of fastening of an emphasis of the power window


 PERFORMANCE ORDER

  1. Remove the panel of an internal upholstery of a door and a polyethylene apron.
  2. Lower glass and disconnect a wire from the minus plug of the rechargeable battery.
  3. Turn off bolts of fastening of guides of a window regulator to fillets.
  4. Lift glass and prop up it wooden whetstone.
  5. Note the provision of wires of the electric drive and disconnect them from plugs.
  6. On a back door turn off fastenings of the back directing fillet of glass and give a fillet forward.
  7. Turn off bolts and nuts of fastening and remove a window regulator together with the electric drive through a door framework window.
  8. You make installation as it should be, the return to removal. At the same time, in case of need, you can adjust the glass lowering course, having weakened a bolt of fastening and having changed the provision of an emphasis on the window regulator lever.