12.2. Removal and installation of a cable of the drive of the lock of a cowl

Connection of a cable of the drive with the cowl lock


 PERFORMANCE ORDER

  1. Remove the lower guard of the dashboard.
  2. Turn off a bolt of fastening of the handle of the lock of a cowl to the side panel and release a cable.
  3. Working in an engine compartment, exempt a cable from an arm and plastic collars, then extend it from clips about the lock.
  4. Disconnect a cable from the lock, having weakened lock nuts and having wrung out a pin from a clip.
  5. Remove a cable from the car.
  6. Installation is conducted as it should be, the return to removal. After installation adjust fastening of a cable lock nuts so that there was no free wheeling.