12.5. Removal and installation of a door of a back (model with a body the versatile person)

 PERFORMANCE ORDER

  1. Remove the lighting lamp of the luggage compartment, without disconnecting conducting.
  2. Unscrew screws of fastening and release the back panel of facing of a ceiling of a body from latches.
  3. At the switched-off rechargeable battery to an otmarkiruyta also disconnect wires from a block on a roof and release collars of fastening of a bunch of wires.
  4. Depending on a complete set remove back loudspeakers and disconnect their conducting.
  5. Disconnect a tube of a washer of glass of a door of a back and, depending on a complete set, vacuum tubes of the central system of blocking.
  6. Supporting a back door, remove spring lock rings and disconnect a gas-filled emphasis of a door from hinges.
  7. Note a pencil the provision of bolts of loops and turn off bolts on several turns.
  8. By means of the assistant remove bolts, supporting a back door, and then remove a door.
  9. You make installation as it should be, the return to removal, putting bolts on earlier put tags before their inhaling. Connection of wires has to be such as you otmarkirovat. Provide centering of a door in an aperture and its coordination with other details of a body. For adjustment of a door weaken bolts of loops of a door and arrange it so that it was aflush with a surface of a body or receded from it within 1,0 mm.
  10. For adjustment of a clamp of the lock slightly release its fastening and screws of a side emphasis, and then close a back door so that it was aflush or receded no more than 1,0 mm concerning a body surface then smoothly open a door and tighten screws. In case of need it is possible to put additional adjusting laying under a clamp or a side emphasis.