12.8. Removal and installation of the panel of an internal upholstery of a door


Models with a body the sedan and the station wagon

 PERFORMANCE ORDER

  1. Turn out the button of switching off of the lock of a door from the top panel and completely lift door glass.
  2. Exempt a plastic insert of the handle of a window regulator from a latch, shift it to the handle and remove (only for doors with a mechanical window regulator).
  3. Notice position of the handle and remove it together with a slip (only for doors with a mechanical window regulator).
  4. Take out from a nest and remove facing of the internal handle of a door. On a door with the power window disconnect the switch.
  5. Remove a frame (one screw), then turn out the top screw of fastening of an armrest.
  6. Turn out the lower screws of fastening and remove an armrest.
  7. Turn out two screws and remove facing of the lock.
  8. On a back door remove an ashtray, lift an emphasis and take out an ashtray nest.
  9. By means of the screw-driver with a wide edge disconnect the upholstery panel from a door. Insert the screw-driver about latches not to damage an upholstery.
  10. Take out the upholstery panel from the top latches and remove it from a door. On forward doors it is necessary to disconnect an internal hook, and on back — to release a latch about an ashtray.


Models with a compartment body

 PERFORMANCE ORDER

  1. Turn out screws and remove a slip from a door end face over the lock and small facing.
  2. Depending on a complete set exempt a plastic insert of the handle of a window regulator from a latch, having displaced it to the handle, and remove.
  3. At the lifted glass of a door note position of the handle of a window regulator, then remove it together with a slip (only for doors with a mechanical window regulator).
  4. Remove facing blocking a rychazhka (one screw).
  5. Remove facing of the internal handle of a door, unscrew the screw and remove a frame.
  6. Unscrew screws of fastening and remove an armrest.
  7. By means of the screw-driver with a wide edge disconnect the upholstery panel from a door, inserting the screw-driver about latches not to damage an upholstery. At the same time it is necessary to exempt a forward edge of the panel from additional latches.
  8. Take out the rear edge of the panel from latches, at the same time releasing it from a blocking rychazhka.
  9. Raising a forward part of the panel, exempt it from an internal hook and remove from a door.


All models

 PERFORMANCE ORDER

  1. In case of need carefully take off a polyethylene apron from a door, trying not to tear it.
  2. You make installation as it should be, the return to removal, having put latches in the correct position before installation of the panel of an upholstery.