2.3.1.4. Installation of the moment of ignition by means of a stroboscope

 PERFORMANCE ORDER

  1. Weaken fastening of the case of the distributor of ignition.
  2. Connect a stroboscope according to the maintenance instruction.
  3. If the distributor of ignition has the vacuum regulator of an advancing of ignition, then disconnect from it a vacuum hose.
  4. Start the engine and bring speed to value for installation of the moment of ignition (see adjusting data in the subsection "Design and Technical Characteristics — System of Ignition").
  5. Turn the ignition distributor case so that the tag on a flywheel of the engine settled down in the center of the hatch of a case of coupling.
  6. In this situation tighten a bolt of fastening of the case of the distributor to an arm and check the course of a curve of the centrifugal regulator of an advancing of ignition (see adjusting data in the subsection "Design and Technical Characteristics — System of Ignition").