Mercedes-Benz E-class W123 - Repair manual and operation

2.3.2.3. Removal and installation of the sensor distributor

Ignition sensor distributor interior A = 3,5 cm 2 — a lock ring 3 — an expansion ring

Removal

PERFORMANCE ORDER

Disconnect wires from the rechargeable battery. Disconnect a terminal block from a sensor distributor block. Turn a bent shaft to VMT of the piston of the 1st cylinder. Unscrew screws of fastening of a cover of the sensor distributor. Turn off bolts of fastening of the case of the sensor distributor. Disconnect a vacuum hose. Remove the sensor distributor.

Installation

PERFORMANCE ORDER

Installation of the sensor distributor is carried out as it should be, the return to removal. At the same time turn a rotor counterclockwise so that to sustain the size "A" equal to 3,5 cm, to risks on the sensor distributor case. Check installation of the moment of ignition.