2.3.2.7. Installation of the moment of ignition

Installation of the moment of ignition

1 — a tag on a conclusion of high voltage of a candle of the 1st cylinder
2 — a sensor distributor rotor
3 — a bolt of fastening of the sensor distributor


Location of tags of installation of a corner of an advancing of ignition on a pulley of a bent shaft on cars with system of ignition of TSZ


 PERFORMANCE ORDER

  1. Turn a bent shaft to VMT of the piston of the 1st cylinder.
  2. Uncover the sensor distributor. Be convinced of coincidence of a tag and rotor of the sensor distributor.
  3. Put a cover of the sensor distributor and check installation of the moment of ignition a stroboscope.
  4. Attach a stroboscope and a tachometer.
  5. Start the engine idling and be convinced of coincidence of tags on a cover of distributive gear wheels and on a scale of a pulley of a bent shaft.
  6. If necessary weaken a bracket of fastening of the sensor distributor and turn the sensor distributor case before coincidence of tags.
  7. Tighten the screw of fastening of a bracket.