2.3. System of ignition


Contact system of ignition


Adjustment of contacts of the breaker


Adjustment by means of a set of laying

 PERFORMANCE ORDER

  1. Uncover the ignition distributor.
  2. Lift a jack a back part of the car, include the IV transfer and turn a bent shaft of the engine, rotating for a bolt of a pulley of a bent shaft so that the fiber small pillow of a hammer of the breaker leaned on a sock of one of ignition distributor drive roller cams.
  3. Weaken the screw of fastening of motionless contact and adjust a gap between contacts with the help of set of laying (see adjusting data in the subsection "Design and Technical Characteristics — System of Ignition").
  4. Tighten the screw of fastening of motionless contact, turn a bent shaft of the engine on several turns to be convinced of the correct adjustment of a gap between contacts.