Removal and installation of the fuel pump



  1. Press the soaking-up and delivery hoses for prevention of an effluence of gasoline.
  2. Disconnect hoses.
  3. Disconnect a wire sealant from an insulating flange of the pump and take aside a wire.
  4. Turn off nuts of fastening of the pump.
  5. Remove the pump.
  6. Remove an insulating flange.


Installation of the fuel pump is carried out as it should be, the return to removal.


  1. Before installation check a condition of epiploons.
  2. Replace the damaged epiploons and an insulating flange. Pay attention that the lock ring of a pusher has to be directed to the pump.