2.4.2.11. Removal and installation of the fuel pump

Removal

Union of the fuel pump

1 — the union of removal of fuel to the drain valve
2 — the fuel supply union from a tank


 PERFORMANCE ORDER

  1. Disconnect from the pump of a tube of discharge and a supply of fuel.
  2. Turn off two nuts of fastening of the pump.
  3. Remove the pump, a heat-insulating pro-rate isolating plugs and a pusher.
  4. Uncover the pump, wash out gasoline and blow compressed air the mesh filter.


Installation

 PERFORMANCE ORDER

  1. Establish a cover so that its adjusting pin entered a pump housing nest.
  2. Establish a heat-insulating pro-rate, having directed a drain opening towards the block of cylinders.
  3. Establish a pusher and the isolating plugs.
  4. Install the pump and wrap fastening nuts.
  5. Attach to unions of the pump of a tube of discharge and a supply of fuel.