1. Remove the air filter.

2. Remove a spring bracket 1 and disconnect connecting draft. Turn off four nuts and eight screws with a cylindrical head.

Carburetor cover

3. Disconnect a vacuum hose from the shock-absorber of the 2nd camera. Uncover with the help the screw-driver of the carburetor and put it on basic inflows.
4. Turn off a fuel supply branch pipe, take out the fuel filter, wash out it in gasoline and blow compressed air.
5. Remove a bracket then take out a float and the needle valve.
6. Turn out air and fuel jets of idling. Clear the main fuel jets of the main dosing systems of dirt and resinous deposits.
7. Turn out the proofreader of qualitative composition of mix of the additional starting arrangement and take a plunger and the proofreader's spring. Turn out the main air jet of the 2nd camera and an air jet of the additional starting arrangement.
8. Turn off four nuts of fastening of the carburetor, disconnect a hose from the block of heating and remove the carburetor.
9. Blow all openings and jets compressed air.
10. Assembly of the carburetor is made as it should be, the return to removal.