2.8.8.5. Removal and installation of a mnogoruchyevy belt of the drive of auxiliary units


The kinematic scheme of a belt of the drive of auxiliary units on the engine M 102.982

And — a belt of the drive of auxiliary units (length of 2170 mm) on cars without conditioner
B — a belt of the drive of auxiliary units (length of 2255 mm) on a car mobiles with the conditioner

1 — a generator drive pulley
2 — an intermediate pulley
3 — a pulley of the drive of the hydraulic coupling of the fan of the cooling system
4 — a tension roller
5 — a pulley of a bent shaft

6 — a drive pulley a computer a conditioner spring
7 — a pulley of the drive of the pump of the hydraulic booster a wheel of vy management
8 — a pulley of the drive of the water pump
9 — the device of an inhaling of a natyazhitel of a belt
10 — a long nut


Removal

 PERFORMANCE ORDER

  1. Turn off a tightening nut of the shock-absorber of a tension of a belt.
  2. Completely weaken a belt, having weakened an adjusting bolt.
  3. Take off a belt at first from one pulley, and then and from others.

At installation of a belt it should be put on pulleys as numbering of units.