2.9.12. Replacement of an oil filter


  1. The oil filter should be replaced through each 10000 km of a run on release engines till 1980 and each 8000 km of a run on the engines released after 1980.
  2. Put any capacity under an oil filter, turn off the central bolt of the case of the filter, merge oil and remove the filtering element.
  3. Wash out the filter case kerosene and dry up. If it is necessary, take a saddle of a spring and a bolt from the case and replace ring consolidation.
  4. Insert a new element, install the case and tighten the central bolt. Turning the case, be convinced that the sealing ring reached the correct position in the nest.