2.9.15.7. Survey and restoration of the oil pump

Details of the oil pump


 PERFORMANCE ORDER

  1. Remove a spring collar from a maslozaborny tube, take out the filter and a rubber support.
  2. Mark the provision of an adjusting arm, turn off and take bolts from a sensor casing.
  3. Separate a casing and remove the conducted gear wheel, having marked its situation.
  4. Wash out details in kerosene and dry them. Check gear wheels and face overlays for degree of wear and if she is too great, replace the oil pump. If details still can be used, put them into place in the return sequence and tighten bolts.
  5. Pump over the oil pump, turning the leading shaft counterclockwise and pouring oil in a sensor tube.