2.9.16.4. Installation of a flywheel (drive plate)

 PERFORMANCE ORDER

  1. Measure a narrow part of fixing bolts by a caliper with the nonius. It should not be less, than it is specified in specifications. Replace bolts if it is necessary.
  2. Dry up the interfaced surfaces, then establish a flywheel (drive plate) on a bent shaft, having combined tags.
  3. Insert bolts and tighten them in the diagonal sequence the determined moment, holding a flywheel (drive plate) from a provorachivaniye the screw-driver with a wide edge inserted into a gear wreath.
  4. Establish, depending on a design, automatic transmission or coupling.