2.9.20.3. Filling of the cooling system

 PERFORMANCE ORDER

  1. Put into place a radiator and the thermostat and connect all hoses.
  2. Put and tighten spuskny traffic jams of a radiator and the block of cylinders.
  3. At the heater included in the provision of supply of hot air fill a radiator or a broad tank with cooling liquid. In a jellied mouth of a radiator there are two tags of level: lower for cold and top for the hot engine.
  4. Put into place a jellied stopper and let's the engine work several minutes on single turns then stop it and check the level of cooling liquid. Add if it is necessary, cooling liquid and put a cover into place.
  5. Bring the engine to normal working temperature and again check level, without forgetting to dump pressure in system before removal of a cover.