2.9.20.8. Check, replacement and adjustment of a belt of the drive of the water pump and generator

Each 24000 km check a driving belt and regulate its tension. Examine a belt on all its length to reveal pozmozhny cracks and wear, and turn the engine to check the belt surfaces contacting to pulleys. Replace a faulty belt.

 PERFORMANCE ORDER

  1. On cars with the amplifier of steering, the air conditioning system (compressor) it is necessary to remove their driving belts at first.
  2. Disconnect a wire of "weight" from the rechargeable battery.
  3. Weaken adjusting bolts and nuts of the generator and shift it to the block of cylinders.
  4. Take off a driving belt from the generator, pulleys of the water pump and a bent shaft and take off a belt via fan blades.
  5. Put on a new belt pulleys and pull it, turning a bolt head with a ratchet, contacting to a lath.
  6. Tighten adjusting bolts and nuts of the generator and attach the negative plug of the rechargeable battery.
  7. Let's the engine work several minutes with all connected electric units, stop the engine and again adjust a belt tension.