2.9.4. Dismantling of a head of cylinders

All knots should be marked to provide the correct assembly.


  1. Remove press slips from the top part of valves.
  2. By means of the device for compression of springs of valves squeeze serially springs so that it was possible to remove cutting locks (crackers). Release adaptation and remove a plate and a spring. If the plate is unclenched hardly, release adaptation and slightly knock with the hammer by its top part. You watch that adaptation was densely got on a plate of a spring.
  3. Take out valves from a head of the block of cylinders.
  4. Shift epiploons of cores of valves from the top part of the directing plugs and remove saddles of springs. If it is necessary, twist spherical fingers of pushers of cams from a head.