3.2.1. Coupling drive

Coupling switching off drive details

1 — a spring
2 — plates

3 — an eccentric bolt

Removal and installation of the working cylinder of coupling



  1. Put the car on the elevator.
  2. Turn off the bringing hose from the working cylinder.
  3. Muffle openings of the union of the working cylinder and a hose.
  4. Turn off bolts of fastening of the working cylinder to the transmission.
  5. Remove the working cylinder, take out a pusher and laying.


Installation of the working cylinder of coupling

1 — the working cylinder
2 — laying

3 — a fastening bolt
4 — the transmission

Installation of the working cylinder is made as it should be, the return to removal, taking into account the following:


  1. Establish laying by a flute towards a transmission case.
  2. Insert a pusher into a basic plate of a coupling switching off fork.
  3. After accession of a hose to the working cylinder pump over hydraulic actuators of coupling and check the coupling pedal course against the stop.