3.2. Removal and installation of coupling

For removal of coupling it is necessary to remove the transmission, working from below the car.


Removal

Check of wear of the conducted clutch plate: the fork of the probe 0,8 mm thick has to pass between a pusher and laying


 PERFORMANCE ORDER

  1. Disconnect the minus plug from the rechargeable battery.
  2. Remove the transmission.
  3. Block a flywheel.
  4. Gradually turn off bolts of fastening of a casing of coupling to a flywheel.
  5. Remove a coupling casing.


Installation

Mandrel for centering of the conducted clutch plate


 PERFORMANCE ORDER

  1. Clear and check a condition of all details, in particular thickness of the conducted disk, a condition of a working surface of a flywheel and a press disk.
  2. Check a condition of the bearing of a main shaft of the transmission in a flywheel nest.
  3. Replace faulty details.
  4. Establish coupling, having arranged the conducted disk the acting part of a nave towards a press disk and center a disk concerning a flywheel a mandrel    of Mercedes 116 589 11 15 00 imitating shlitsevy the end of a main shaft of the transmission.
  5. Wrap bolts of fastening of a casing of coupling to a flywheel.
  6. Remove a clamp from a flywheel.
  7. Apply on vents of a main shaft of the transmission a thin film of lubricant for coupling.
  8. Install the transmission.
  9. Attach the minus plug to the rechargeable battery.