5.5.6. Check of working pressure


  1. Remove a stopper 7 and attach the oil pressure manometer (see the illustration Check of Pressure).
  2. Disconnect a hose from the vacuum regulator.
  3. Start the engine, bring the frequency of rotation of a bent shaft to 1000 rpm, put the selector lever in position "D" and take readings of the manometer on the standing car.

    Working pressure is not regulated. Its size indicates only operability of a zolotnik and the regulator of working pressure of the hydraulic block.

  4. Before starting check of working pressure, it is necessary to adjust the modulating pressure precisely.