5.5.8. Adjustment of the switch of blocking of a starter


The mechanism of the choice of transfers on a steering column

3 — the directing lever
4 — the switch of the choice of transfers
5 — fastening screws
6 — the spherical hinge
9 — a cable

10 — a collar
14 — an arm
15 — a lock nut
16 — the spherical hinge
18 — the selector lever
20 — a spherical tip


 PERFORMANCE ORDER

  1. Weaken two bolts of fastening of the switch of blocking of a starter.
  2. Put the selector lever in position "N".
  3. Insert a core with a diameter of 4 mm via the lever of the choice of transfers to the switch drive coupling against the stop into a transmission case opening.
  4. Tighten bolts of fastening of the switch of blocking of a starter.