6.3.3. Removal and installation of the back bridge
Section of the sensor of anti-blocking system of brakes installed on some models
|
- Remove shaft of the drive of back wheels.
- Remove cardan transfer.
- Remove the sensor of anti-blocking system of brakes (ABS), having turned off a fastening bolt a face key, and take him aside.
- Disconnect a cable of the parking brake.
- Lower a jack cart a little and turn off nuts of fastening of a case of the back bridge to a cross-piece.
- Taking precautionary measures and working together, lower the back bridge and bring it out of the car.
- Turn off bolts of fastening and remove a back arm of a suspension bracket from a case cover. Carry out its fault detection and, if necessary, replace.
- Installation is carried out as it should be, the return to removal. Самоконтрящиеся bolts and nuts are subject to replacement. Be convinced of purity of a surface of the ABS electromagnetic sensor and check oil level (the car costs on the flat platform).
|
|