7.8. Removal and installation of the top lever of a suspension bracket

 PERFORMANCE ORDER

  1. Prepare the car, having exposed the lower levers of a suspension bracket on support.
  2. Turn off a nut of the top spherical hinge and a stripper separate the top lever of a suspension bracket from a rotary fist. Take a fist aside and fix it on the car.
  3. Turn off a bolt of fastening of the stabilizer to the top lever of a suspension bracket, having noted the provision of washers and rubber plugs.
  4. In a motor compartment turn off a nut and a vypressuyta an internal hinged bolt, having noticed its situation concerning the direction of the movement.
  5. Remove the top lever of a suspension bracket of the car and carry out its fault detection.
  6. In case of wear of rubber plugs they can be replaced by means of a piece of a metal pipe of the necessary length, a long bolt and laying.
  7. For simplification of installation of new plugs they are recommended to be shipped in soap water.

Installation is carried out as it should be, the return to removal. In conclusion check the angles of installation of forward wheels.

Position of the plug at installation

1 — a body
2 — the top lever of a suspension bracket
3 — rubber saylent-block
4 — a piece of a tube
And — a forward part of the car