8.5.1. Removal and installation of the diagonal lever of a back suspension bracket

 PERFORMANCE ORDER

  1. Remove a back suspension bracket in collecting (see Removal and installation of a back suspension bracket assembled).
  2. Remove a wheel drive shaft.
  3. Turn off nuts and take fastening bolts, then remove the diagonal lever of a suspension bracket from a cross-piece (see an illustration Zadny Bridge).
  4. If it is necessary, rubber plugs of knots of fastening can be removed by means of a mandrel, a long bolt, nuts and laying. New rubber plugs can be installed in the same way for what at first moisten them with soap water and insert from the external surface of the diagonal lever of a suspension bracket.