9.1. Design and technical characteristics


Design and technical characteristics

Steering with the " mechanism the screw nut on the circulating balls" (a ball nut). The steering column safety (power absorbing) consists of two parts. On separate models the hydraulic booster of steering is installed.

Characteristic

Value

Length of a pipe corrugated, mm

  • with mechanical control

368,5 — 369,5

  • with the hydraulic booster

321,5 — 322,5

The most admissible side play on diameter of a steering wheel, mm

25,0

Disorder of forward wheels, hail.

from -0 °20' to +0 °10'

Longitudinal tilt angle of an axis of turn, hail.

8 °15' — 9 °15'

Maximum difference of longitudinal corners of an axis of turn at the left and on the right, hail.

0 °30'

Convergence, hail.

0 °25' (3,0±1,0 mm)

Driving belt

One mnogoruchyevy belt.

Engine model

Width x length, mm
Number

M 102

12,5 x 750

1.987.947.400

1.987.947.648

M 110

12,5 x 825

1.987.947.402

1.987.947.650

M 115

12,5 x 750

1.987.947.400

1.987.947.648

M 123

12,5 x 825

1.987.947.402

1.987.947.650

Power steering pump

The pump of the hydraulic booster with the built-in tank is given to rotation by a mnogoruchyevy belt of the drive of auxiliary units.

Oil for hydraulic system of steering

Oil level in a tank has to concern a tag "full" or be about 20 mm from edge of a tank. Replacement of oil is not provided.

Characteristic

Value

Filling capacity of system, l

1,4

The used oil

ATF

Review frequency of level of oil

each 20000 km

Moments of an inhaling of the main threaded connections, кгс.м

Connection type

Value

Самоконтрящиеся nuts

  • shaft with a diameter of 30 mm

14,0 — 18,0

  • shaft with a diameter of 32 mm

16,0 — 20,0

Tip of cross draft

4,1 — 5,0

Fastening of a quencher of fluctuations

4,5

Fastening of a case of the steering mechanism

6,9 — 8,0

Steering bipod

  • M22

14,0 — 17,9

  • M24 (pendular lever)

16,0 — 19,9

Rotary lever

8,0

Steering wheel to a shaft

8,0

The pump of the hydraulic booster to an arm

3,4

Steering shaft to a case

2,5

Steering column

  • top fastening

0,9

  • lower fastening

2,4

The union of the drain highway with a hydraulic pump

3,5 — 4,5

The union of the drain highway with a case of the steering mechanism

3,5 — 4,0


On release cars since September, 1979 instead of a nut the conical bolt which is replaced with new is established.