9.5.1. Removal, dismantling and installation of the pendular lever

 PERFORMANCE ORDER

  1. Tighten the parking brake, you will hang out a forward part of the car on support (supports).
  2. Rasshplintuyte, turn off nuts of fastening of longitudinal steering draft and a tip of cross thirst for the pendular lever. For a detachment of longitudinal draft from the lever use a stripper of lever type (DB 065 or HAZET 779).
  3. Turn off самоконтрящуюся a nut in the lower part of the pendular lever and remove a washer.
  4. Lift pendular levers, having noted the mutual provision of washers and dustproof caps.
  5. Remove plugs from the pendular lever, using, if necessary, a drift from soft metal.
  6. Clear all details and carry out their fault detection.
  7. Installation is carried out to the sequences, the return to removal.