- Pump out liquid from a pump tank (syringe).
- Weaken the top hinged bolt and a nut on the forward end of an adjusting bolt.
- Turn an adjusting bolt towards weakening of a tension of a belt and take off a driving belt from a pulley.
- Remove hinged and adjusting bolts, remove the pump of the hydraulic booster from the engine.
- In case of need turn off a nut and remove a pulley by means of a stripper.
- You make installation as it should be, the return to removal, previously having examined plastic plugs of an arm of fastening and having replaced them in case of need.
- Pull a driving belt in that degree as operation (a deflection of 10 mm) demands.
- Remove air from a hydraulic system (see Removal of air from a steering hydraulic system).
|
|